SUPPORT ZOPO


sickw.co free 5 imei | zhaoguo Check imei hoặc S/N | iphonemodel.com Check S/N | iphoneox.com | iunlocker.net | Gọi 18001127 cho apple


HOÀNG GIA BẢO - trummayco.vn



vietfones.vn | dongnaigsm.vn | clubgsm.vn | vietnamgsm.vn  | suadt.com | gsmviet.vn | saigonmobile.vn  | dienthoaisimso.vn  | vngsm.vn

kythuatphone.vn | vietmobile.vn | gsm24h.vn | fteam.vn | allsolu4u.vn | vngsmteam.com




Kết quả 1 đến 6 của 6

Chủ đề: RIFF JTAG New Updates

  1. #1
    Moderator toilatoi142001's Avatar
    Ngày tham gia
    Aug 2015
    Bài viết
    413
    Thanks
    48
    Thanked 98 Times in 36 Posts

    RIFF JTAG New Updates






    Hello,
    Here is list of latest RIFF Box updates:

    - RIFF JTAG Manager v1.64:


    • Fixed Password Recovery feature
      (Authorization code sending feature was broken, due to wrongly configured timeout)
    • Fixed bug which caused JTAG Manager crash after clean install and successive downloading of a DLL file while there were no PKG files installed.
    • Improved login interface - the registered email is automatically filled in to the Login field.
      (Remember that You can use both registered user name or e-mail as login. With this feature Your registered e-mail address is automatically inserted in login dialog form, so You just have to type in Your password)
    • JTAG Manager Main Window Width is increased to increase the width of Resurrector Name fields

    Please read description carefully !

    User contributed Riffpkg (Repair packs made with Package Editor) uploaded to Official RIFF Box Update Server:
    [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]


    Special thanks goes to [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]], [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]], [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]and [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]] .
    toilatoi142001@yahoo.com
    AGRIBANK 6120205234525:SACOMBANK:060117021036 chủ tài khoản bùi tri phương
    0979.273.573: 0933.090.445: 092.444.0137

    Mong ae không chỉ là khách xem bài, hãy đăng ký 1 nick ngay bây giờ để cùng tôi xây dựng www.zopo.vn ngày càng vững mạnh,thanks

  2. #2
    VIP
    Ngày tham gia
    Jan 2015
    Bài viết
    1,038
    Thanks
    12
    Thanked 37 Times in 29 Posts


    RIFF Box Updates, 06.02.2017




    Hello,
    We just uploaded following DLL-s to support storage:



    • [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]

    RIFF JTAG – HTC ONE M8w 4G LTE Boot repair supported

    Posted on [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]
    Repairing bricked HTC One M8Wlv (0P6B20000) via ISP connection is easy with the RIFF Box.
    Additionally to HBOOT and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0P6B20000’.

    To resurrect HTC One M8Wlv (0P6B20000) via ISP connection:

    • Get access to HTC One M8Wlv (0P6B20000) board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor;
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable;
    • Make sure HTC One M8Wlv (0P6B20000) ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;

    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.


    • [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]

    RIFF JTAG – HTC Desire Eye 4G LTE EMEA M910n Boot repair supported

    Posted on [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]
    Repairing bricked HTC Desire M910n (0PFH11000) via ISP connection is easy with the RIFF Box.
    Additionally to HBOOT and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0PFH11000’.

    To resurrect HTC Desire M910n (0PFH11000) via ISP connection:

    • Get access to HTC Desire M910n (0PFH11000) board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor;
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable;
    • Make sure HTC Desire M910n (0PFH11000) ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;

    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.

    To download and install these files, simply click "Check for updates" button in JTAG Manager, and select new files for download.

  3. #3
    VIP
    Ngày tham gia
    Jan 2015
    Bài viết
    1,038
    Thanks
    12
    Thanked 37 Times in 29 Posts


    RIFF JTAG Box updates, 20.02.2017




    Today's updates:


    • [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]

    RIFF JTAG – Samsung SM-A300F Galaxy A3 LTE Boot repair supported

    Posted on [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]
    Repairing bricked Samsung A300F via ISP connection is easy with the RIFF Box.
    To resurrect Samsung A300F via ISP connection:

    • Get access to Samsung A300F board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor (30R);
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable (in some cases also attach battery);
    • Make sure Samsung A300F ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;

    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.




    • [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]

    RIFF JTAG – Samsung SM-A500F Galaxy A5 LTE Boot repair supported

    Posted on [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]
    Repairing bricked Samsung A500F via ISP connection is easy with the RIFF Box.
    To resurrect Samsung A500F via ISP connection:

    • Get access to Samsung A500F board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor (30R);
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable (in some cases also attach battery);
    • Make sure Samsung A500F ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;

    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.


    • [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]

    RIFF JTAG – HTC One M8 ULCA (AT&T) Boot repair supported

    Posted on [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]
    Repairing bricked HTC One M8Ulca (0P6B12000) via ISP connection is easy with the RIFF Box.
    Additionally to HBOOT and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘0P6B12000’.

    To resurrect HTC One M8Ulca (0P6B12000) via ISP connection:

    • Get access to HTC One M8Ulca (0P6B12000) board (PCB);
    • Check schematics picture for solder positions of CLK, DAT0, CMD and GND signals;
    • Remove (de-solder) the CLK resistor;
    • Solder CLK, DAT0, CMD and GND wires to the specified pads on the PCB;
    • Attach battery
    • Connect USB Data cable;
    • Make sure HTC One M8Ulca (0P6B12000) ISP is selected in the list of models;
    • Click Resurrect button;
    • Wait till software signals a successful operation completion;
    • Disconnect USB cable and battery, de-solder wires and solder back the CLK resistor;

    Now phone is in bootable condition, that is, even if it does not start up normally you can flash it using known flashing methods.




    To download these files click "Check for Updates" button in "Box Service" TAB.

  4. #4
    VIP
    Ngày tham gia
    Jan 2015
    Bài viết
    1,038
    Thanks
    12
    Thanked 37 Times in 29 Posts


    RIFF JTAG Manager v1.66, RIFF II Firmware v1.42 (10x faster)




    Hello,
    Please read this carefully if You are RIFF Box v2 user:

    RIFF JTAG Manager 1.66
    ---------------------------
    - RIFFBOX2 support for new connection mode is added (for new Drivers)
    - Due to new drivers Read/Write speeds via eMMC interface increased 10 times and more
    - Read/Write speed is now shown in MB/s
    - Firmware Update process adjusted for slow networks (Indonesia, Bangladesh, India . . .)


    RIFF Box Firmware v1.42

    ---------------------------
    - RIFFBOX connection mode is optimized for better speed, it is no more the CDC.
    The data transfer speeds are increased more than 10 times.
    - Fixed bug in handling the erroneous situations during eMMC data read operations.


    RIFF Box v2 users:

    1. Download new files from server (JTAG Manager and "New Drivers")
    2. Click "Firmware Update" and wait for process to be finished,
    (Update port driver remains old ! ! !)
    3. Install new drivers from "New Driver" folder in JTAG Manager install dir.

    New driver, together with new firmware will dramatically increase performances with eMMC chips and SD cards.
    Theoretical speed is up to 18MB/s using 4bit bus width.
    In practice it can depend on eMMC chip model but even for oldest chips it's near 10MB/s.

    [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]


    RIFF Box v1 users don't need to install new driver, as it cannot be implemented for old hardware for now.
    __________________



  5. #5
    VIP
    Ngày tham gia
    Jan 2015
    Bài viết
    1,038
    Thanks
    12
    Thanked 37 Times in 29 Posts


    RIFF JTAG Manager v1.67, RIFF Box Firmware v1.43




    JTAG Manager 1.67
    ---------------------------
    - Fixed bug (which is related to RIFFBOX2 only), which caused box connection error, after this operation: "Setting new JTAG/eMMC License to the RIFFBOX."

    RIFF Box Firmware v1.43
    ---------------------------

    - Fixed bug related to RIFF Box v1 eMMC detection
    - Fixed bug related to RIFF Box v2 USB 2.0 ports enumeration

    New RIFF Box v2 drivers:
    ----------------------------
    - Drivers from year 2014 (x86 and x64)


    Instructions for users with V2 box and "Device cannot start, error code 10" problem:

    Method 1:
    - Disconnect RIFF Box v2 from USB port
    - Open box housing and take PCB out
    - Connect TP1 to TP2 using tweezers,
    - Connect USB cable to Box and PC
    - Disconnect TP-s
    - Launch JTAG Manager (any version from 1.65 and up)
    - Perform Firmware Update as requested

    After You connect TP-s and USB cable, box will enumerate in bootloader mode. RIFF Update Port driver is required (like allways during firmware update) and Recovery firmware will be flashed.
    After this, normal Firmware Update procedure will follow and You can use RIFF Box on any USB port (2.0 or 3.0).

    Method 2:

    - Find working USB 3.0 port (By working means that LPCDevice driver works)
    - Update box to V1.43 firmware



  6. #6
    VIP
    Ngày tham gia
    Jan 2015
    Bài viết
    1,038
    Thanks
    12
    Thanked 37 Times in 29 Posts


    RIFF Box Firmware v1.45, RIFF JTAG Manager v1.69 eMMC Plugin v3.02 released




    Firmware 1.45
    ---------------------------
    - Added MassStorage Mode for RIFFBOX2



    JTAG Manager 1.69

    ---------------------------
    - Fixed the bug for General Purpose Partition Sizes
    - Added feature to switch ON/OFF the MassStorage Mode. For this, please connect an eMMC (either via Direct or ISP interface),
    make sure it is detected (on the "eMMC/SD Card" page), and on the 'eMMC/SD Advanced' dialog click the 'MassStorage Mode ON/OFF' button to setup which partitions are to be mounted.
    Please note, for stable connection, first of all do reads on the "eMMC/SD Card" page to adjust stable Frequency, BusWidth and Voltage.
    After you click "MassStorage Mode ON/OFF" button, current settings for Voltage, Frequencty, BusWidth will be written into RIFFBOX non-volatile memory,
    and while the MassStorage mode is ON, upon each connection to USB the RIFFBOX will additinally to normal Control interface enumarate the MassStorage Disks (as if a FlashStick is connected to PC)

    eMMC Partition Table FullFlash Image Files Processing Plugin
    (eMMCDiskPartitions.dll) v3.02
    -------------------------------------
    - Added support for User Area Partition bounds selection from the JTAG Manager's MassStorage settings dialog
    - Added file system detection: the plugin analyzes the partition's data structure to autodetect what file system (if any) is used. The result is displayed in the new "F/S" row
    ..

    To mount EXT/x partitions You should install EXT FS driver from here:

    [Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]




Facebook comment



Visitors found this page by searching for:

Nobody landed on this page from a search engine, yet!

Quyền viết bài

  • Bạn không thể đăng chủ đề mới
  • Bạn không thể gửi trả lời
  • Bạn không thể gửi đính kèm
  • Bạn không thể sửa bài
  •