trong tay có volcano gặp e này khoai quá nhờ ae giúp
máy viettel v6303 chip spd sc6500
Volcano Updated: 2014-06-12
Connecting...
Connection successful,connected state!
Version: V3.8
SN:450-071-253
Port:COM21
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
SPD U Disk Error Flash files password is = VolcanoAheadOfAllEVER
Available Ports:COM21
Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM22), (VID_1782&PID_4D00)


Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
OR_RSP(0x97) func:_FDL_HWInit, line:4
Please put the baud set 115200, try again.
Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM22), (VID_1782&PID_4D00)

Internal version: SPRD3
Before Format,please load back-up phone file first.
Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM22), (VID_1782&PID_4D00)

Internal version: SPRD3
Before Format,please load back-up phone file first.
Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM22), (VID_1782&PID_4D00)

Internal version: SPRD3
Before Format,please load back-up phone file first.
Detection initiated...
Vcc: null
Gnd: 7
Analyzing D+ and D-...
D+ = 4, D- = 3
Analyzing USB device, please wait...
Find USB device:SPRD U2S Diag (COM22), (VID_1782&PID_4D00)


Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
OR_RSP(0x97) func:_FDL_HWInit, line:4
Please put the baud set 115200, try again.
>>Ready to read/write again, please remove the power supply clip or battery and then re-loaded it.
đã dùng ver cao nhất nhưng kung thế


[Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]