Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Nokia Lumia 520...
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 520 V1.0.5149.18900]


Connecting to the dead body...OK
Detected dead body ID: 0x207D00E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz


Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK


Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (M8G2YC, 0x0001D2000000 Bytes = 7.28 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (M8G2YC, 0x000000400000 Bytes = 4.00 MB)


Selected Resurrection Data for the eMMC Chip with Capacity = 7.28GB


Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x51 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000


[Chỉ đăng ký mới thấy Links. [Để xem được liên kết bạn phải trả lời chủ đề này.]]