================================================== ====

1. Turn OFF Phone and wait 10 Seconds...
2. Connect the USB Cable to the PHONE Micro USB Port
3. Connect the USB Cable to the PC USB Port

TIPS & INFORMATION:
1. To Turn OFF the Phone, PRESS and HOLD the POWER
button for at least 10 Seconds...
2. Battery Charging will still work on "DEAD" Phones.
3. Factory Reset will make Flashing 15 minutes longer
and it will Totally Erase the User Data and Remove
the Phone Lock + Security Code as well...
4. Skip ADL Chk will Cold Flash the Device.
================================================== ====
================================================== ====

Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTROM MODE
Sending PRIMARY-BOOT: SUCCESSFUL!
Waiting For Phone on USB PORT/s...
REQUIRED MODE: BOOTROM MODE
Sending SECONDARY-BOOT: SUCCESSFUL!

================================================== ====
SECURE USER DATA ERASING IN PROGRESS
================================================== ====
Secure Data Erasing takes about 15 MINUTES...
DO NOT DISCONNECT THE PHONE!!! JUST WAIT...

Estimated time to Finish Erasing: 11:08:18 (24-h Time Format)
================================================== ====

Battery Voltage Test: PASSED

Ready to Flash Images to Device...
=========================================
Processing Image: cert-sw
Processing Image: cmt-2nd
Processing Image: cmt-algo
Processing Image: cmt-mcusw
Processing Image: xloader
Processing Image: secondary
Processing Image: kernel
Processing Image: rootfs
=========================================
All Images were Succssfully Uploaded!
Software Update Done

[]: Found 1 active devices.
[Nokia N900 USB Phonet]: Opening Connection
[Nokia N900 USB Phonet]: Port opened OK!
Rebooting Phone...

Total Flashing Time (Erase + Flashing) : 00:17:42
(Booting time is NOT Included)



Phone is not Connected OR it is not in the
Required Mode...
Reboot the Phone and Enable "PC Suite" Mode


Life timer data is not yet used...
Life timer: ----:--


Scanning USB Ports...

================================================
Basic Phone Information
================================================
MCU Version: V 92_11w51_3 19-04-12 RM-696 (c) Nokia
IMEI Plain : V 92_11w51_3 19-04-12 RM-696 (c) Nokia
IMEI Spare : 33531363639303532303237383333300
IMEI SV : A351669052
IMEI (2nd) : 3 f ‡Cð
Category : Nokia NoRM6
Phone Type : RM-696

================================================
Extended Phone Information
================================================
Product Serial Number: Nokia Reference Mobile
Product Code : CWG202906
Module Code : 059L9K0
Basic Production Code: 0204965
Flash Code : 059G8V7
ADSP Version : 6.15
HW Version : V 92_11w51_3 19-04-12 RM-696 (c) Nokia
PCI Version : 1603
DSP Version : |Alli_4.b.1
LCD Version : 92_11w51_3
Camera : fe.91.96
APE BT Version : 0c:560f:03
Content Pack Version : 00060000060d0020
AHNE Version : DFL61_HARMATTAN_30.2012.07-1.SEAP
APE SW Core Version : 2.3.6
Variant Version : 40.2012.21.3.454.6 V 1.3.2 RM-696 (c) NOKIA.
RETU Version : V 1.3.2
TAHVO Version : 11
APE HW Version : 00
APE ADSP SW Version : 1603

================================================
Simlock Information
================================================
CONFIG KEY : 0000000000000003
PROVIDER KEY : 2440700000000000
NETWORK NAME : Nokia Default;Finland
LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10
SIMLOCK TABLE :
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE : Not Locked

SIMLOCK_TYPE : UNKNOWN
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SECURITY_CODE : 12345
PHONE_MODE : TEST
DCC ID : NOT USED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
OK
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune